Schaeffler Product catalogue - medias
Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.
(0)

YRTS200


Axial/radial bearings

double direction, for screw mounting, for higher speeds

  
Send to shopping basket
Radial loadAxial load in one directionAxial load in two directionsMoments about all axesNot sealedGrease lubrication
Hole pattern
2 retaining screws (1)
 
d 200  mm  Tolerance: 0/-0,015
D 300  mm  Tolerance: 0/-0,018
H 45  mm   
  46  Number of fixing holes in inner ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
  45  Number of fixing holes in outer ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
  2  Number of retaining screws
  3  Number of extraction threads
a 6,2  mm  Fixing holes in inner ring
C 15  mm   
D1 max 274,4  mm  Diameter of inner ring for design of adjacent construction
d1 7  mm  Fixing holes in inner ring
d2 11  mm  Fixing holes in inner ring
d3 7  mm  Fixing holes in outer ring
G M8  Extraction thread
H1 30  mm   
H2 15  mm   
J 215  mm  Fixing holes in inner ring
J1 285  mm  Fixing holes in outer ring
t 48 x 7,5°  Pitch t
Including retaining screws and extraction threads

Quantity X t
m 9,7  kg  ≈ Mass
MA 14  Nm  Screw tightening torque

Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 155000  N  Basic dynamic load rating, axial
C0a 840000  N  Basic static load rating, axial
Cr 94000  N  Basic dynamic load rating, radial
C0r 226000  N  Basic static load rating, radial
Cur 32000  N  Fatigue limit load, radial
Cua 92000  N  Fatigue limit load, axial
nG 1160  1/min  Limiting speed
caL 4000  N/µm  Axial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 1200  N/µm  Radial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 29000  Nm/mrad  Tilting rigidity of the bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 13600  N/µm  Axial rigidity of rolling element set
crL 3900  N/µm  Radial rigidity of rolling element set
ckL 101000  Nm/mrad  Tilting rigidity of rolling element set
Mm 667  kg * cm^2  Mass moment of inertia for rotating inner ring IR
Mm 435  kg * cm^2  Mass moment of inertia for rotating outer ring AU
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information