Schaeffler Product catalogue - medias
Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.
(0)

YRTC850-XL


Axial/radial bearings

Double direction, for screw mounting

  
Have you also thought about mounting? You can find further information here on mounting of the selected types. Alternatively, contact one of our Engineering Offices for further assistance.
Send to shopping basket
Radial loadAxial load in one directionAxial load in two directionsNot sealedGrease lubrication
Hole pattern
2 retaining screws (1)
 
d 850  mm  Tolerance: 0/-0,05
D 1095  mm  Tolerance: 0/-0,063
H 124  mm   
  58  Number of fixing holes in inner ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
  54  Number of fixing holes in outer ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
  2  Number of retaining screws
  6  Number of extraction threads
a 17  mm  Fixing holes in inner ring
C 37  mm   
D1 max 1018  mm  Diameter of inner ring for design of adjacent construction
d1 18  mm  Fixing holes in inner ring
d2 26  mm  Fixing holes in inner ring
d3 18  mm  Fixing holes in outer ring
G M12  Extraction thread
H1 80,5  mm   
H2 43,5  mm   
J 890  mm  Fixing holes in inner ring
J1 1055  mm  Fixing holes in outer ring
t 60 x 6°  Pitch t
Including retaining screws and extraction threads

Quantity X t
m 253  kg  ≈ Mass
MA 284  Nm  Screw tightening torque

Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 1020000  N  Basic dynamic load rating, axial
C0a 8500000  N  Basic static load rating, axial
Cr 520000  N  Basic dynamic load rating, radial
C0r 1690000  N  Basic static load rating, radial
Cur 163000  N  Fatigue limit load, radial
Cua 590000  N  Fatigue limit load, axial
nG 50  1/min  Limiting speed
Continuous operation
nG 125  1/min  Limiting speed
Swivel type operation, short operating duration
MR 130  Nm  Bearing frictional torque
caL 26500  N/µm  Axial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 11900  N/µm  Radial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 2351000  Nm/mrad  Tilting rigidity of the bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 61900  N/µm  Axial rigidity of rolling element set
crL 12000  N/µm  Radial rigidity of rolling element set
ckL 6772000  Nm/mrad  Tilting rigidity of rolling element set
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information