Schaeffler Product catalogue - medias

Close window

Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.

☰

(0)

Selection wizards:

medias Home Linear guidance systems V V6035

V6035

Guideways

V guideways with angled needle roller flat cage; corrosion-resistant design possible

h₃	20 mm
A₃	35 mm	Tolerance: 0/-0,2
L_max	1300 mm	Guideways longer than the stated maximum length are available in several sections. For multi-piece guideways, state total length when ordering.

37)		Holes for wipers, end piece
38)		Hole type 15
39)		Hole type 10
4)		Marking
40)		Hole type 03
a₁	26 mm
a_min	1,3 x 45°
C₄	100 mm	MV3015; for L=100 mm to 109 mm, C4=35 mm (3 holes). Other sizes: for L < C4 + C5 min + C6 min, C4 = 50 mm.
C_{5 min}	20 mm	C5 and C6 are dependent on the guideway length and are identical at both ends of the guideway. C5 and C6 = (L - total C4) / 2 ; values must not be less than C5 min and C6 min.
C_{6 min}	20 mm	C5 and C6 are dependent on the guideway length and are identical at both ends of the guideway. C5 and C6 = (L - total C4) / 2 ; values must not be less than C5 min and C6 min.
h₁	11 mm
K₁	M8	for screws to DIN 912- 8.8
K₃	M6
t_min	20 mm