Schaeffler Product catalogue - medias
Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.
(0)

TSX65-E-U


Guideways

for linear recirculating roller bearing and guideway assembly RUE..-E, for screw mounting from below

  
Send to shopping basket
 
h 53,8  mm   
b 63  mm  Tolerance: -0,005/-0,035
lmax 5865  mm  Maximum length of single-piece guideways.
Permissible guideway segments: see information sections (positional and length tolerances of guideways)
1)   Locating face
2)   Marking
aL max 61  mm  aL and aR are dependent on the guideway length
aL min 20  mm  aL and aR are dependent on the guideway length
aR max 61  mm  aL and aR are dependent on the guideway length
aR min 20  mm  aL and aR are dependent on the guideway length
G1 M16  for screws to DIN ISO 4762-12.9

Max. tightening torque [MA] in Nm:
M6 = 17
M8 = 41
M10 = 83
M12 = 140
M14 = 220
M16 = 340


The stated torques represent maximum values for the reliable transmission of forces in vibration-free, quasistatic applications (S0=1). We recommend that the tightening torques of the screw connection to the adjacent construction should be determined at the customer under the specific application conditions and operating conditions, observing the data in VDI Guideline 2230 Part 1 (2015) and the data in the description.
h1 28,5  mm  Tolerance: +/-0,5
jL 75  mm   
K1   for screws to DIN ISO 4762-12.9

Max. tightening torque [MA] in Nm:
M6 = 17
M8 = 41
M10 = 83
M12 = 140
M14 = 220
M16 = 340


The stated torques represent maximum values for the reliable transmission of forces in vibration-free, quasistatic applications (S0=1). We recommend that the tightening torques of the screw connection to the adjacent construction should be determined at the customer under the specific application conditions and operating conditions, observing the data in VDI Guideline 2230 Part 1 (2015) and the data in the description.
t7 25  mm   
mS 19,5  kg/m  Mass of guideway
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information