Schaeffler Product catalogue - medias
Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.
(0)

TSNW20-G4


Guideways

solid profile, for location from above, with one raceway shaft, accuracy class G4; corrosion-resistant design possible

  
Send to shopping basket
 
dLW 20  mm  Tolerance: h6
h4 32  mm  Tolerance: +/-0,1
In relation to the nominal shaft diameter, measured whilst clamped.

Deviation of h4:
- accuracy class G4
- deviation 0,03 mm

Maximum deviation of dimension h4, measured on the same support rail over a length of 1000 mm
b 52  mm   
lmax 4000  mm  Tolerance: +/-2

Maximum length of single-piece shaft and support rail units
5)   The shaft protrudes beyond the support rail by approx. 2 mm on each side.
aL max 92  mm  aL and aR are dependent on the guideway length
aL min 20  mm  aL and aR are dependent on the guideway length
aR max 92  mm  aL and aR are dependent on the guideway length
aR min 20  mm  aL and aR are dependent on the guideway length
b3 7,8  mm   
H8 6  mm   
h7 0,2  mm   
jB 37  mm   
jL 100  mm   
K3 6,6  mm  For fixing screws to DIN 7964
If there is a possibility of settling, the fixing screws should be secured against rotation.
K6 6,6  mm   
K7 M6x25  ISO 4762
mS 3800  g/m  Mass of guideway
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information