Schaeffler Product catalogue - medias

Close window

Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.

☰

(0)

Selection wizards:

medias Home Linear guidance systems LUE LUE5025

LUE5025

Flat cage guidance systems

L counterstay system with needle roller and cylindrical roller flat cages; corrosion-resistant design possible

39)		Hole type 10
40)		Hole type 03
45)		Locating bearing guidance system
46)		Non-locating bearing guidance system
A₂	30 mm
A₃	20 mm
A₄	31 mm
C₄	50 mm
C_{5 min}	20 mm
C_{6 min}	20 mm
F₁	13840 N	Limit loads: For a theoretical cage length of 100 mm in the main load directions. Calculation of limit loads for effective cage lengths: Fw 1/2/3 = Fw 1/2/3 x (Lk - 2e + t) / 100 with Z = ((Lk - 2e) / 100) + 1 = whole number
F₂	15630 N	Limit loads: For a theoretical cage length of 100 mm in the main load directions. Calculation of limit loads for effective cage lengths: Fw 1/2/3 = Fw 1/2/3 x (Lk - 2e + t) / 100 with Z = ((Lk - 2e) / 100) + 1 = whole number
F₃	12650 N	Limit loads: For a theoretical cage length of 100 mm in the main load directions. Calculation of limit loads for effective cage lengths: Fw 1/2/3 = Fw 1/2/3 x (Lk - 2e + t) / 100 with Z = ((Lk - 2e) / 100) + 1 = whole number
H	50 mm	Tolerance: 0/-0,2
H₂	27,5 mm
H₃	17 mm
K₁	M6	Screws of grade 10.9 should be used
M_A		Tightening torques for fixing screws: For screws K1; grade 10.9 M6 = 12 Nm M8 = 29 Nm M12 = 101 Nm