Schaeffler Product catalogue - medias
(0)

KWEM07-WL


Carriages

wide, long carriage for miniature linear recirculating ball bearing and guideway assembly, corrosion-resistant, two-row

  
Send to shopping basket
Compressive loadTensile loadMoments about all axesSealed on all sidesProtected against rustGrease lubricationOil lubrication
Load directions
 
H 9  mm   
B 25  mm   
L 42  mm   
1)   Locating face
A1 5,5  mm   
A2 3  mm   
A3 1,7  mm   
aL max 20,5  mm   
aL min 5,5  mm   
aR max 20,5  mm   
aR min 5,5  mm   
G2 M3  For screws to DIN ISO 4 762-12.9
If there is a possibility of settling, the fixing screws should be secured against rotation.
Max. tightening torque (Nm):
M2 = 0,6
M3 = 2,2
M4 = 5
H1 2  mm   
h1 2,3  mm   
JB 19  mm   
JL 19  mm   
jL 30  mm   
K1 M3  For screws to DIN ISO 4 762-12.9
If there is a possibility of settling, the fixing screws should be secured against rotation.
Max. tightening torque (Nm):
M2 = 0,6
M3 = 2,2
M4 = 5
L1 32,5  mm   
lmax 300  mm  Maximum length I max of guideways; longer guideways by agreement.

Available standard lengths:
90 mm: 0,049 kg
120 mm: 0,065 kg
150 mm: 0,08 kg
180 mm: 0,097 kg
240 mm: 0,13 kg
300 mm: 0,16 kg
T5 3  mm   
mW 0,031  kg  Mass of carriage
mS 0,54  kg/m  Mass of guideway
CI 1833  N  Load direction I: compressive load
C0 I 4160  N  Load direction I: compressive load
CII 1833  N  Load direction II: tensile load
C0 II 4160  N  Load direction II: tensile load
CIII 1631  N  Load direction III: lateral load
C0 III 3494  N  Load direction III: lateral load
M0x 29,8  Nm  Moment rating
M0y 17,6  Nm  Moment rating
M0z 21  Nm  Moment rating
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information