Schaeffler Product catalogue - medias
Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.
(0)

KTSO20-PP-AS


Linear ball bearing and housing units

open design, with self-aligning linear ball bearing, contact seals on both sides

  
Send to shopping basket
Compressive loadTensile loadStatic angular error and misalignmentDynamic angular error and misalignmentSealed on all sidesGrease lubricationOil lubrication
View X
 
Fw 20  mm   
H 42  mm   
B 60  mm   
L 96  mm   
  6  Number of rows of balls
1)   Main load direction
A5 30  mm  Tolerance: +0,01/-0,01
B2 10  mm  Dimension B2 on diameter Fw
G2 M8   
H2 25  mm  Tolerance: +0,008/-0,016
H5 8  mm   
H6 24  mm   
JB 45  mm  Tolerance: +0,15/-0,15
JL 76  mm  Tolerance: +0,15/-0,15

Dimension JL symmetrical to bearing length L.
K5 M6  for fixing screws to ISO 4762-8.8
If there is a possibility of settling, the screws should be secured against rotation.
K8 NIP4MZ  Lubrication nipple
Lubrication hole symmetrical to bearing length L.
L6 33  mm  Dimension L6 symmetrical to bearing length L.
N1 6,6  mm   
N3 11  mm   
N4 2 x 4,25  mm  Centring hole to DIN 332 type A
T5 18  mm   
α 55  °   
m 520  g  Mass
    Basic load ratings in main load direction

The basic load ratings are only valid for hardened (670 HV +165 HV) and ground shaft raceways.
Cmax 3500  N  Basic dynamic load rating
C0 max 4600  N  Basic static load rating
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information