Schaeffler Product catalogue - medias
(0)

KGBAO50-PP-AS


Linear ball bearing and housing units

open design, sealed, greased, with relubrication facility; corrosion-resistant design possible

  
Send to shopping basket
Compressive loadTensile loadSealed on all sidesGrease lubricationOil lubrication
 
Fw 50  mm   
H 93  mm   
B 130  mm   
L 100  mm  Tolerance: h12
  5  Number of rows of balls
1)   Main load direction
A3 19  mm   
A5 65  mm  Tolerance: +/-0,015
B2 22,7  mm  Dimension B2 on diameter Fw
H2 50  mm  Tolerance: +/-0,015
H6 12,5  mm  Tolerance: 0/-0,5
JB 108  mm  Tolerance: +/-0,2
JL 50  mm  Tolerance: +/-0,2
K5 M8  For fixing screws to ISO 4762-8.8
If there is a possibility of settling, the screws should be secured against rotation.
K8 NIPA2  Lubrication nipple
L4 70  mm   
L5 72  mm   
N1 9,2  mm   
N3 15  mm   
W1 4  mm  Note maximum tightening torque.
Tightening torque max. 7 Nm
α 54  °   
m 1,65  kg  Mass
C 8900  N  Basic load ratings in main load direction

The basic load ratings are only valid for hardened (670 HV +165 HV) and ground shaft raceways.
C0 6600  N  Basic load ratings in main load direction

The basic load ratings are only valid for hardened (670 HV +165 HV) and ground shaft raceways.
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information