Schaeffler Product catalogue - medias
(0)

KB30-PP-AS


Linear ball bearings

sealed on all sides, with relubrication facility; corrosion-resistant design possible

  
Send to shopping basket
Compressive loadTensile loadSealed on all sidesGrease lubricationOil lubrication
 
Fw 30  mm  Tolerance: +0,011/-0,001
D 47  mm  Tolerance: h5
L 68  mm  Tolerance: h12
  6  Number of rows of balls
BL2 1,85  mm  Slot dimensions suitable for retaining rings to DIN 471.
DN 44,5  mm  Slot dimensions suitable for retaining rings to DIN 471.
L2 51,7  mm  Tolerance: H13
N2 2,5  mm   
    With initial greasing, sealed on both sides, with relubrication facility.
m 0,3  kg  Mass of bearing
Cmin 3600  N  The basic load ratings are valid only for hardened (650 HV + 165 HV) and ground shaft raceways.
C0 min 2850  N  The basic load ratings are valid only for hardened (650 HV + 165 HV) and ground shaft raceways.
Cmax 3800  N  The basic load ratings are valid only for hardened (650 HV + 165 HV) and ground shaft raceways.
C0 max 3600  N  The basic load ratings are valid only for hardened (650 HV + 165 HV) and ground shaft raceways.
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information