standard series 25, without gear teeth, lip seals on both sides
2D drawings and 3D CAD models
Drawings for 2D CAD systems and models for 3D CAD systems are available via the portal "TraceParts.com". Clicking on the link will take you directly to the download page for the selected product:
Support on this page can be obtained by e-mail or by telephone (+49 / 96 21 / 9173-0) from TraceParts GmbH.
Attention You wish to use 2D CAD drawings and 3D CAD models in your system that describe products. These CAD drawings and models are prepared with great care and the data are checked for correctness. However, no liability can be accepted for any incorrect or incomplete information. Please also take note of our Conditions of use.
Due to the ongoing development of our products, we reserve the right to make modifications to the product range and to product designs. We reserve all rights to trademarks, brands, patents, drawings and models. We do not know how the product will be installed or its operating conditions; furthermore, variations in representation may occur as a result of differences in CAD system configurations. We cannot therefore accept any liability for the suitability of the selected product or for the representation of the product on your CAD system.
We therefore urgently recommend the following action:
all relevant mounting dimensions should be checked using the information in the dimension drawing.
the suitability, performance capability and the expected life of the product should be checked using appropriate methods. Start calculation program
the suitability of the product should be checked by means of tests.